Do You Need A Gledhill PulsaCoil 2000 Replacement?

(Unfortunately we no longer carry out any type of servicing on a Gledhill PulsaCoil 2000 or do any type of installation work, however if you require parts we can provide them to you at a fair price). Please fill in the form at the bottom of this page and we will try and help you find an engineer. 

We have included a few videos which explain what a leaking system looks like and if a Gledhill PulsaCoil 2000 replacement is needed . We have also included videos on why you have a Gledhill PulsaCoil 2000 and the difference between copper and stainless steel.

 

Leaking Gledhill PulsaCoil 2000 Video

This video will go over leaks which you may find and if that type of leak mean you need your system replaced. 

 

Why You Have A Gledhill PulsaCoil 2000

This video will explain why you most likely have a Gledhill PulsaCoil 2000 and may only replace it for a Gledhill PulsaCoil replacement system like the Eco. 

Copper Vs Stainless Steel Pulsacoil Replacement

This video will explain the difference between a Copper based product and a Stainless Steel one. Please remember some factors do not apply on storage systems which are mains pressured, open vented. Your new Gledhill PulsaCoil replacement will most likely be a stainless steel system.

PulsaCoil Replacement, The New Gledhill PulsaCoil Eco Stainless.

Need a PulsaCoil Replacement? We aim to give our customers the best possible service. Below is information on the New Gledhill PulsaCoil Eco Stainless. If you have a Gledhill Pulsacoil 2000 then following system can replace it. Fill in the form on the bottom of this page so we can put you in touch with a company who can replace your Gledhill PulsaCoil 2000 for this new system. The Gledhill PulsaCoil 2000 Replacement we recommend is a Gledhill PulsaCoil Eco Stainless system which is a thermal store open vented mains pressure system. This system does not require a temperature relief or a pressure relief valve subsequently does not require any discharge pipework. It therefore overcomes Part G Building Regulations which prohibits the connection of a discharge pipe from an un-vented cylinder into a soil stack. It contains two new types immersion elements. The Pulsacoil Eco Stainless is manufactured from stainless steel. It is specifically designed for use in apartments but can be adapted to work in houses as well. The hot water provided will be at the same pressure as the cold water. It utilises off-peak electric to minimise electricity costs. The method used to generate hot water through the plate heat exchange completely removes the risk of legionella. Does not legally require any annual maintenance. It is available in 3 sizes, 150, 180 and 220.

Below are dimensions and further information on the 3 sizes available.

---

PulsaCoil Replacement PCS 150 Eco.

PulsaCoil 150 Eco Stainless Design. Appliance Dimensions: Height (A) - 1145mm Width  (B) - 560mm Depth  (C) - 630mm Note: The Appliance Dimensions above do not allow for the 100mm high installation base. It is highly recommended an installation base be used and not avoided when having a PulsaCoil replacement carried out. Minimum Cupboard Dimensions: Height (A) - 1895mm Width  (B) - 600mm Depth  (C) - 645mm Note: The above table of minimum cupboard dimensions only allows the minimum space required for the appliance (including the F&E cistern). Any extra space required for shelving, pipes etc in the case of airing cupboards etc must be added. The above dimensions are based on the Appliance and the Top up cistern (fitted with a ballvalve) being in the same cupboard. If the manual fill method is chosen the heights can be reduced by 125mm.  

---

 

PulsaCoil Replacement PCS 180 Eco.

PulsaCoil 180 Eco Stainless Design. Appliance Dimensions: Height (A) - 1275mm Width  (B) - 560mm Depth  (C) - 630mm Note: The Appliance Dimensions above do not allow for the 100mm high installation base. It is highly recommended an installation base be used and not avoided when having a PulsaCoil replacement carried out. Minimum Cupboard Dimensions: Height (A) - 2025mm Width  (B) - 600mm Depth  (C) - 645mm Note: The above table of minimum cupboard dimensions only allows the minimum space required for the appliance (including the F&E cistern). Any extra space required for shelving, pipes etc in the case of airing cupboards etc must be added. The above dimensions are based on the Appliance and the Top up cistern (fitted with a ballvalve) being in the same cupboard. If the manual fill method is chosen the heights can be reduced by 125mm. This is the most common Gledhill Pulsacoil replacement we sell.  

---

 

PulsaCoil Replacement PCS 220 Eco.

PulsaCoil 150 Eco Stainless Design. Appliance Dimensions: Height (A) - 1575mm Width  (B) - 560mm Depth  (C) - 630mm Note: The Appliance Dimensions above do not allow for the 100mm high installation base. It is highly recommended an installation base be used and not avoided when having a PulsaCoil replacement carried out. Minimum Cupboard Dimensions: Height (A) - 2325mm Width  (B) - 600mm Depth  (C) - 645mm Note: The above table of minimum cupboard dimensions only allows the minimum space required for the appliance (including the F&E cistern). Any extra space required for shelving, pipes etc in the case of airing cupboards etc must be added. The above dimensions are based on the Appliance and the Top up cistern (fitted with a ballvalve) being in the same cupboard. If the manual fill method is chosen the heights can be reduced by 125mm.